What Actually Leaks in a Pool (and Why It Is Rarely the Light)
Ask most pool owners where they think their pool is leaking, and they will point at the light, or worry about a crack in the lining or the tiles. It makes sense. Those are the parts you can see, so they are the parts you suspect.
The trouble is that the data says almost the opposite. I went back through 87 pool inspections we have on file, and when you look at where the leaks actually turned out to be, the things people fear most are near the bottom of the list, and the real culprit is something most owners never think about.
Where the leaks actually are
The return line is by far the most common, by a wide margin. It came up in more of my reports than any other location, more than the next two put together. The return line is the pipe that carries filtered water back into the pool, and it is under pressure whenever the pump runs, which is exactly why it fails and why it loses water quickly when it does.
The weir, or skimmer box, is next. This is where water is drawn off the surface, and cracks in the weir housing or its connections are a common and often overlooked source of loss.
Then the suction line. This is the pipe that pulls water from the pool to the pump. A leak here often shows itself differently: instead of losing water visibly, it draws air into the system, so you see bubbles coming back through the returns and the pump loses prime.
After those come the fittings and connections, the various joints where pipes meet the pool structure, and only then the things people usually suspect first.
The parts people fear, and rarely need to
Pool lights come up far less often than their reputation suggests. They can leak, through the conduit rather than the fitting usually, but they are well down the list.
Cracked linings, shells and tiles are rarer still in my reports. A visible crack looks alarming, and occasionally it is the problem, but far more often the crack is cosmetic and the water is leaving through the plumbing somewhere else entirely. This matters, because it is easy to spend money repairing a crack that was never the leak, while the pool keeps dropping.
The invisible one
There is one cause worth knowing about above all the others, because it leaves nothing to find.
A worn multiport valve washer. The multiport valve is the one on your filter with the settings like filter, backwash and waste. When the internal washer, called the spider gasket, wears, water flows continuously from the pool straight out through the waste line and away, even with the valve set to filter.
The reason this one catches everyone out is that the water never touches the ground. There is no wet patch, no soft spot in the lawn, no damp wall, nothing. The pool simply keeps dropping and every visible part of it looks perfect. Owners often chase this one for months, refilling constantly, convinced there must be a crack somewhere, when the water has been running quietly down the waste line the whole time.
Why this is worth knowing before you call anyone
None of this means you can find your own pool leak, because most of these need equipment and testing to locate precisely. But it does mean you can be a little wary of the obvious answer.
If someone glances at your pool, points at the light or a hairline crack in the tiling, and quotes you to fix it, it is worth asking how they confirmed that is actually where the water is going. The data says the odds are it is the return line, the weir or the suction side, none of which you can see, and one of which leaves no trace at all.
First, make sure you actually have a leak
Before any of this matters, it is worth confirming the pool is genuinely leaking rather than just evaporating. There is a simple bucket test you can do yourself over 24 hours that settles it.



Frequently Asked Questions
Can I tell where my pool is leaking myself?
My pool light looks like it is leaking. Is it?
The pool keeps dropping but there is no wet ground anywhere. What is that?
How is the actual leak located?
The reading does not match my bill. What now?
What to do now
If your pool is losing more water than evaporation explains, the odds are it is the plumbing rather than anything you can see. Finding exactly where saves you repairing the wrong thing.
Fill in our online form with a photo of the pool and the pump setup, and I will tell you what is likely going on and what it would take to find it.
